Industrial Furniture

IMG_1609.jpg

Engineering Worktable

Made to order 12 week lead time

Sit down workbench. engineering and design centre

Specifications

Length 1.50m Width 0.675m Height 0.70m

Designed for metal, wood, and other material working and engineering, by engineers or hobbyists.

Stainless steel welded 38mm square section frame.

2mm section end frames

2mm section beams, 8mm steel threaded tensioning rods

12 mm marine plywood shelf

Stainless steel hardware

Single steel U section chassis with cable fixing points

Turnbuckle adjustable stainless steel tensioning wires on three sides

Stainless steel frame fixture plates

40mm laminated table top with 9mm marine plywood base layer, 25mm MDF middle section, and 4.5mm hardboard top, steel reinforcing bars. 5mm side and front stainless steel framing and work surfaces with fixture mounting points .Replaceable hardboard desktop

Dynabolt adjustafeet

Price NZD 4400 plus delivery

IMG_1610.jpg
IMG_4282E.jpg

DD McLeod Design Logo Engineering Worktable with Engineering Workchair

Inlaid handbeaten copper, engraved, and epoxy filled

Engineering Workcentre    Made to order 12 week delivery lead time from date of confirmed order

Engineering Workcentre

Made to order 12 week delivery lead time from date of confirmed order

Specifications

Length  1.65m Width 0.58m Height  0.90m    

Stand alone bolt together work centre, designed for both metal, wood, and other material working by engineers and hobbyists. Machine centre centric.

Stainless steel welded 38mm square section frame

Welded 3mm end frames, 2mm beams. End frames with central removable beam also suitable for a centre shelf

Stainless steel hardware

Single steel U section chassis with cable fixing points

Frame tensioning rods, turnbuckle adjustable stainless steel cross bracing tensioning wires on one side

12mm marine plywood bottom lift out shelf

5mm frame mounting plates for fixtures or an internal cabinet

45mm Victorian Ash solid wood benchtop, as 3 x 190mm bolt down planks with 5mm stainless steel end clamps

Dynabolt adjustafeet

Also suitable for a fitted wood vice please inquire for plans or parts

Price NZD 5,500 plus delivery. Includes fitted standard bench vice of choice

Engineering Workchair ‘The 7 degreee chair’    Made to order 12 week delivery lead time from date of confirmed order

Engineering Workchair ‘The 7 degreee chair’

Made to order 12 week delivery lead time from date of confirmed order

Industrial extra heavy duty stainless steel framed bolt-together workchair. Designed for use with the Engineering Worktable. Dual adjusting backrest and seat. Designed for sitting at a worktable with weight forward and allowing stable movement around the work area.

Specifications

Stainless steel 38mm x 2mm square section frame

5mm stainless steel reinforcing plates and seat and backrest adjusters

Backrest and seat centrally pivoted on steel threaded rods, with wingnut securing and brass locking cup washers

Seat fitted carved laminated kiln dried pine sections with a 9mm marine plywood base board

Counter balanced and turnbuckle adjustable stainless steel wired seat

Backrest bentwood beech plywood with marine plywood base board

Double adjustable industrial castor wheels, lockable on the front

Standard seat angle -7 degrees, adjustable to +14 degrees

Price NZD 2,200 plus delivery